How to Choose Flooring CRM Software: A Demo Checklist for Showrooms
Compare flooring CRM software with one showroom job. Use this demo checklist to test customer records, estimates, project handoffs, and invoicing.
A customer changes their flooring selection after the estimate goes out. The new product comes in a different carton size, and the person who wrote the estimate is off tomorrow. Can another salesperson find the revised quantities, tell which version the customer saw, and hand the right details to whoever sets up the job?
Bring that kind of job to every demo when you compare flooring CRM software. Give each vendor the same details, ask them to work through the same change, and have them show you the estimate and invoice your customer would receive. You'll see where the software fits your showroom and where your staff would still have to do the work by hand.
Bring one showroom job to every demo
Illustrative example. A homeowner wants 420 square feet of luxury vinyl plank installed across a living room and hallway. The showroom uses a 10% allowance for this example, bringing the material target to 462 square feet. The first product covers 23.5 square feet per carton. For a store that orders whole cartons, that means 20 cartons covering 470 square feet. The estimate also includes two transition strips, removal of the old flooring, and installation. The homeowner wants the invoice sent to one address and the work carried out at another.
After the vendor prepares the estimate, ask them to switch to a product that covers 21 square feet per carton. Keep the measured area and the allowance the same. Then ask a second team member to take over the approved job. For the billing test, your example store invoices materials first and installation after the work is complete.
Use dummy customer details. If your store quotes in square metres, bills in a single invoice, or uses a different allowance, adapt the job to your own process. Keep those inputs consistent across demos.
Start with a customer your staff can find again
Ask the vendor to use an existing customer record. Have one person find it by phone number and check where the billing address, job address, and document contact are stored. Then have another person open the same record and find the estimate or the job it led to.
Try an address correction. Ask the vendor to show where staff would make the change and what happens to a document that has already gone out. Record any step that depends on copying details from a note or searching a shared inbox.
Change the estimate and review the customer copy
Ask the vendor to build the estimate the way your sales team quotes today. Where do staff enter the measured area, allowance, carton coverage, and order quantity? Which quantities does the software calculate, and which does the salesperson enter or verify? With the replacement product in this example, the target of 462 square feet takes 22 cartons at 21 square feet per carton.
Open both versions of the estimate. Check whether the customer can identify the selected product, trims, removal, and labour from the document. Confirm where the salesperson checks the price basis, especially if the store buys by the carton and quotes by area. Ask how staff can identify the version the customer accepted.
Hand the approved job to someone who did not write the estimate
Have the vendor show how staff move from the accepted estimate to a project or job record. Ask which details carry over and which need to be entered again. Then give the screen to the person playing the project coordinator. Can they find the installation address, the approved product and quantity, the removal work included in the price, and the next action?
Add one ordinary exception. The homeowner asks to change a transition strip after approval. Ask where staff record the change, who reviews it, and how the office can tell which scope is current before ordering or billing.
Check what was invoiced and what remains
Ask the vendor to create an invoice for the flooring and transition strips. Leave removal and installation for the second invoice. Open the customer-facing invoice and confirm that it uses the intended billing details and lists only the materials. Then go back to the job and ask the vendor to show what has already been invoiced and which lines remain available to bill.
Ask the vendor to show how your bookkeeper would get the records they need. If you expect to keep your current accounting software, verify the handoff using your actual accounting setup and the tax labels your store uses. Record whether that handoff is built in, an export, or a manual step.
Use the same checklist for every vendor
Print one copy of this checklist per vendor. For each test, circle the result and write down what you saw, any manual work, and any plan or add-on required.
Vendor ____________________
Plan ____________________
Demo date ____________________
| Test and demo notes |
|---|
| Customer record Find the existing customer and use the correct billing and job addresses. Result Shown / Manual / Pending Notes ____________________ ____________________________ |
| Estimate revision Swap the product, verify carton quantities and price, and open the revised customer copy. Result Shown / Manual / Pending Notes ____________________ ____________________________ |
| Project handoff Open the approved job as a second staff member and locate the scope, address, and next action. Result Shown / Manual / Pending Notes ____________________ ____________________________ |
| Scope change Record the revised trim selection and show how staff identify the current scope. Result Shown / Manual / Pending Notes ____________________ ____________________________ |
| Invoicing Bill materials, leave labour for later, and show what is still available to invoice. Result Shown / Manual / Pending Notes ____________________ ____________________________ |
| Setup and cost Identify the quoted plan, user access, setup costs, and which existing records can be brought over. Result Shown / Manual / Pending Notes ____________________ ____________________________ |
Before signing, pick the steps your team would struggle to do manually on a busy day. Ask the vendor to run those steps again with the plan and user roles in their quote. If you're switching systems, ask which customer records and open jobs can be moved, who will check the imported records, and what your staff will need to enter themselves.
What to ask to see in an FBM demo
Flooring Business Manager supports standalone estimates with catalog products or manually entered lines. Its customer records bring together contacts, addresses, linked projects, and invoices. For project billing, staff can select the project lines to invoice, and FBM marks invoiced lines as locked on the project.
Bring the checklist to the walkthrough. Ask the presenter to show how your team would move from an estimate to a project, handle a scope change, and get records to your bookkeeper. Confirm the plan and staff permissions for the steps your showroom needs.
Request an FBM demo and tell us which part of the job you'd like to see first. A short description of your quoting and invoicing process is enough to start.